Description
Controller M200 24 IO transistor Source TM200C24T
Easy Modicon TM200C24T PLC Schneider PLC 24I/O Transistor PNP
TM200 PLC 24I/O
| range of product |
Easy Modicon M200
|
|
|---|---|---|
| product or component type |
Logic controller
|
|
| [Us] rated supply voltage |
24 V DC
|
|
| discrete I/O number |
24
|
|
| discrete input number |
I2…I5: 4 fast input
I0, I1, I6, I7: 4 high speed input I8…I13: 6 regular input |
|
| discrete output number |
Q0…Q1: 2 fast output (PLS/PWM/PTO mode)
Q2…Q9: 8 transistor output |
|
| discrete input voltage |
24 V
|
|
| discrete input voltage type |
DC
|
|
| discrete input current |
7 mA for input
|
|
| discrete input logic |
Sink or source (positive/negative) type 1 conforming to EN/IEC 61131-2
|
|
| discrete output voltage |
24 V DC
|
|
| discrete output current |
0.5 A
|
|
| discrete output type |
Transistor
|
|
| discrete output logic |
Positive logic (source)
|
|
| power consumption in W |
16 W at 24 V DC (with max I/O)
|
| maximum number of I/O expansion module |
4 with 64 discrete output(s) for relay output
4 with 138 discrete output(s) for transistor output |
|
|---|---|---|
| supply voltage limits |
20.4…28.8 V
|
|
| inrush current |
35 A
|
|
| voltage state 1 guaranteed |
>= 15 V for input
|
|
| voltage state 0 guaranteed |
<= 5 V for input
|
|
| input impedance |
3.3 kOhm for discrete input
|
|
| response time |
1 ms turn-on, Q0…Q9 terminal(s) for output
1 ms turn-off, Q0…Q9 terminal(s) for output 5 µs turn-off, I0, I1, I6, I7 terminal(s) for high speed input 5 µs turn-on, I0, I1, I6, I7 terminal(s) for high speed input 100 µs turn-off, I2…I5 terminal(s) for fast input 35 µs turn-on, I2…I5 terminal(s) for fast input 100 µs turn-off, I8…I13 terminal(s) for regular input 35 µs turn-on, I8…I13 terminal(s) for regular input |
|
| configurable filtering time |
0 ms for input
3 ms for input 12 ms for input |
|
| maximum current per output common |
2 A at COM 0
3 A at COM 1 |
|
| Schneider PLC TM200C24T
output frequency |
100 kHz for fast output (PWM/PLS mode) at Q0…Q1
|
|
| maximum leakage current |
0.1 mA for transistor output
|
|
| maximum voltage drop |
<1 V
|
|
| maximum tungsten load |
<12 W for output and fast output
|
|
| protection type |
Overload and short-circuit protection at 2 A
|
|
| reset time |
1 s automatic reset
|
|
TM200C24T memory capacity |
512 byte internal flash for backup of programs
|
|
| data storage equipment |
32 GB micro SD card (optional)
|
|
| battery type |
BR2032 Li-CFx (Lithium-Carbon Monofluoride), battery life: 5 year(s)
|
|
| backup time |
3 years at 25 °C (by interruption of power supply)
|
|
| execution time for 1 KInstruction |
0.3 ms for event and periodic task
|
|
| execution time per instruction |
0.2 µs Boolean
|
|
| exct time for event task |
60 µs response time
|
|
| Schneider PLC TM200C24T
clock drift |
<= 90 s/month at 25 °C
|
|
| regulation loop |
Adjustable PID regulator up to 14 simultaneous loops
|
|
| positioning functions |
PWM/PLS 2 channel(s) at 100 kHz
|
|
| control signal type |
Quadrature (x1, x2, x4) at 100 kHz for fast input (HSC mode)
Pulse/direction at 100 kHz for fast input (HSC mode) Single phase at 100 kHz for fast input (HSC mode) CW/CCW at 100 kHz for fast input (HSC mode) |
|
| counting input number |
4 fast input (HSC mode) at 100 kHz 32 bits
|
|
| integrated connection type |
USB port with mini B USB 2.0 connector
Non isolated serial link serial 1 with terminal block connector and RS485 interface Non isolated serial link serial 2 with terminal block connector and RS232/RS485 interface Isolated serial link serial 2 with terminal block connector and RS485 interface |
|
| transmission rate |
1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485
1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 12 Mbit/s for USB |
|
TM200C24T communication port protocol |
USB port: USB – SoMachine-Network
Non isolated serial link: Modbus master/slave – RTU/ASCII or SoMachine-Network |
|
| local signalling |
1 LED (green)PWR:
1 LED (green)RUN: 1 LED (red)module error (ERR): 1 LED (green)SD card access (SD): 1 LED (red)BAT: 1 LED (green)SL1: 1 LED per channel (green)I/O state: |
|
| electrical connection | Mini B USB 2.0 connectorfor a programming terminal removable screw terminal blockfor inputs removable screw terminal blockfor outputs |
|
| maximum cable distance between devices |
Unshielded cable: <50 m for input
Shielded cable: <10 m for fast input Shielded cable: <10 m for high speed input Unshielded cable: <150 m for output |
|
| insulation | Non-insulated between inputs Between input and internal logic at 500 V AC |
|
| marking |
CE
|
|
| mounting support |
Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 plate or panel with fixing kit conforming to IEC 60715 |
|
| height |
90 mm
|
|
| depth |
70 mm
|
|
| width |
130 mm
|
|
| net weight |
0.416 kg
|
| IP degree of protection |
IP20 with protective cover in place
|
|
|---|---|---|
| standards |
EN/IEC 61010-2-201
EN/IEC 61131-2 |
|
| Schneider PLC TM200C24T
electromagnetic compatibility |
Electrostatic discharge immunity test – test level: 8 kV (air discharge) conforming to EN/IEC 61000-4-2 Electrostatic discharge immunity test – test level: 6 kV (contact discharge) conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields – test level: 10 V/m (80 MHz…3 GHz) conforming to EN/IEC 61000-4-3 Magnetic field at power frequency – test level: 30 A/m conforming to EN/IEC 61000-4-8 Electrical fast transient/burst immunity test – test level: 2 kV (power lines) conforming to EN/IEC 61000-4-4 1.2/50 µs shock waves immunity test – test level: 1 kV (power lines (DC)) conforming to EN/IEC 61000-4-5 |
|
| shock resistance |
15 gn for 11 ms
30 gn for 6 ms |
|
| immunity to microbreaks |
2 ms
|
|
| vibration resistance |
3.5 mm at 5…8.4 Hz on symmetrical rail
1 gn at 8.4…150 Hz on symmetrical rail 3.5 mm at 5…8.7 Hz on panel mounting 2 gn at 8.7…150 Hz on panel mounting |
|
| relative humidity |
10…95 %, without condensation (in operation)
10…95 %, without condensation (in storage) |
|
| ambient air temperature for operation |
0…55 °C (horizontal installation)
|
|
| ambient air temperature for storage |
-25…70 °C
|
|
| pollution degree |
<= 2
|
|
| operating altitude |
0…2000 m
|
|
| storage altitude |
0…3000 m
|
Reviews
There are no reviews yet.